MODEL 12 WINCHESTER PUMP

Discussion in 'Technical Questions & Information' started by Scon55, Feb 23, 2012.

  1. Scon55

    Scon55 New Member

    Joined:
    Aug 24, 2011
    Messages:
    4
    I have this model 12 pump made in 1932. I have seen photos of these with different butt plates / pads on them. Mine has a redish color butt pad on it and seems to be professionally fitted to the gun. Is this the right pad or should it have the black buttplate with the winchester logo? Thanks alot for your help.
  2. muddober

    muddober Active Member

    Joined:
    Sep 19, 2008
    Messages:
    1,447
    I think all the three inch magnums came with the red pad as you are describing, but I don't know how early they made magnums. Also your gun is old enough it may have been a special order.

    Ron
  3. StoneChimney

    StoneChimney New Member

    Joined:
    Nov 27, 2010
    Messages:
    1,086
    Probably aftermarket, but if you can post a clear picture of the butt of the gun and the entire gun in general we can tell you for certain.
  4. The Duke

    The Duke New Member

    Joined:
    Mar 11, 2006
    Messages:
    812
    Location:
    NW Louisiana
    My dads M12 circa 192? has a black plate...Mine circa 1961 is black...My 3" mag Circa 70's I owned at one time had an reddish recoil pad...
Similar Threads
Forum Title Date
Technical Questions & Information Model 43 Winchester (.218 Bee) - terrible trigger! Saturday at 8:49 PM
Technical Questions & Information Winchester Model 67, is it loaded May 30, 2014
Technical Questions & Information Winchester model 12 magazine tube - need help May 25, 2014
Technical Questions & Information Winchester Model 1873 Apr 6, 2014
Technical Questions & Information Pre 64 model 70 Stainless barrel in 270 Winchester Apr 5, 2014

Share This Page