Mosin Nagant question????

Discussion in 'Curio & Relics Forum' started by big steve, Jul 25, 2010.

  1. gandog56

    gandog56 Member

    May 9, 2008
    Mobile AL.
    The Chinese used some kind of cheap wood for their stocks. They almost never look good.
  2. jstgsn

    jstgsn Well-Known Member

    Nov 1, 2009
    Milford, Delaware

  3. targetacqmgt

    targetacqmgt New Member

    Sep 21, 2012
    The russians alone made 30-40 MILLION of these rifles. The russians stopped using them in the 1980's. Don't worry about hunting ammo(soft lead point)- lots of it made by BEar and other russian companies. Even US firms make some in reloadedable boxer primed non -corrosive ammo. The iron sights on most of the "long" Mosins go to 2000 meters. Soo do NOT snap shoot game and know what is BEHIND the game if you miss your shot. Do lots of range time. the M44 carbines go to 1500 meters. The effective range is about 1000 meters with a inexpensive scope.

    The Finns made a couple of million and are prized by shooter and collectors (they are better made with good scandanavian steel or belgian steel.

    I have one russian mosin rifle made in 1923 - I do not have a problem hunting with it. I do not consider it a collector piece- which I suspect someone will tell me it is.
  4. Checkout Classic Arms, they still have them for 99 or Aims, they were out but check again. You might look in for J@G and Widener's as well.
    good luck.
  5. PMK

    PMK Former Guest

    Dec 8, 2012
    Evansville, Indiana
    Have a 1928 Tula hex. Counter bored once. Does not shoot as accurate as my '43 Izzy "Salt Mine" gun. But it has better balance since its furniture is the lighter Siberian Beech. The '43 is pine. Tula is supposedly more accurate so they say. '43 would shoot clays at 100 yds. all day long tho. The '28 is more detailed and she told me she loves me, so she is my favorite. The '43 Izzy was probably more accurate because she probably never fired in the line of duty. She was used by guards in the mines. Buy the ones you can put hands on. And watch out for those as well as some people will run bore sheen down them to try and throw you off. No pits? Then your good to go. They are all pretty accurate across the board.
  6. PMK

    PMK Former Guest

    Dec 8, 2012
    Evansville, Indiana
  7. PMK

    PMK Former Guest

    Dec 8, 2012
    Evansville, Indiana
    Ooops. Guess I did that in the wrong order. Were not the Finnish weapons modified captures?
  8. gandog56

    gandog56 Member

    May 9, 2008
    Mobile AL.
    If the original barrels passed some rather vigorous Finn test standards, the Finns just stamped the barrels with the SA mark Now the wood is a different story.
  9. scottbird

    scottbird New Member

    Jan 24, 2013
    Troy PA
    I have been buying these rifles for several years, back when I first started buying them I paid around $40.00. now in my area $150.00 is the norm. I buy them and sprotsize them. I redo the bolt, so it is bent, cut off the stock, sand and refinish the stock, re blue the barrel, I cut the barrel down to 24" and scope it.

    after all this I spend around $275.00 and they sell around $375.00. I do not make much money at it, but it is a hobby, and I enjoy doing it.
    I got a good friend that had his job downsized last year and his son turned 14 this year and he wanted to take him hunting, and could not afford a rifle for him. of course I have a huge heart for kids, even more when it comes to learning sportsmanship, so I gave him one of my rifles.

    I could not of been prouder than when the second day of the season he brought over a nice 9 point that he shot with that rifle at 125 yards.

    Good guns, they will do what you want.
  10. olafhardt

    olafhardt Member

    These bubbles of plenty can pass, I once bought an SKS for 65 bucks off a table full of them in a gun show full of tables full of SKS's.
  11. gun-nut

    gun-nut Member

    Jan 15, 2011
    I did some digging around on my Finn.M39. This is what i found.

    Barrels were made in Belgium
    Assambled in Finland
    The M39's are known for there accurarcy
    They were prodused for match shooting in the 60's and 70's
    They used Russian Hex recivers (Round recivers are rare)
    The stock fingers in the middle of the stock indicates Post war build. along with a pistol grip. (The pistol grip is not as big as you would think but its thier)
    Weight: 9 1/2 lbs.
    OAL: 46 3/4"
    Barrel length: 27"
    Stock length: 42 3/4"

    As i dug more on mine, when they built thease they will and could have Barrels marked in the 1940's. War time Barrels are used on the post war M39's but they my have not been used in the war.(a "B" marking)(mine has a 1942 date with the "B" mark. meaning post war. The SA is there as well) Most post war guns made were leftover parts from the war. They will have a recessed crown for match shooting.

    Sorry did not mean to highjack the posting but i hope that some of this imfo will help someone out. There is not much imfo on the Finn.from what i can find.
  12. gandog56

    gandog56 Member

    May 9, 2008
    Mobile AL.
    M39's are ANOTHER story. I have a finn Capture SA stamped Remington M91 Mosin Nagant. I have a couple SA stamped 91/30's. I also have a M39 with a VKT barrel, which I believe the Finn made. They used receivers bought from Russia, that's the only for sure.
    Various M39 Finn Barrel Manufacturers
    Tikka (Later Tikka was acquired by Sako, I believe)

    The "B" barrels were manufactured in Belgium, but the whole rifle was assembled in Finland.
    Last edited: Feb 28, 2013
Similar Threads
Forum Title Date
Curio & Relics Forum 1941 Izhevsk M91/30 Mosin-Nagant odd stock marking Jan 2, 2017
Curio & Relics Forum Mosin Nagant Sighting Apr 22, 2016
Curio & Relics Forum Mosin Nagant Safety Question Feb 17, 2013
Curio & Relics Forum 1905 Mosin Nagant Nov 6, 2012
Curio & Relics Forum U.S. Westinghouse Mosin Nagant "what does the brass circle on the stock mean?" Aug 30, 2012