1. Get Gear'd Up! Enter to WIN $1000 in gear!

    Please Click Here for full details and to enter. You will need to be registered and logged in to view the details and to participate.

    Thanks and good luck to everyone

Need a Remington model 12 inner magazine tube

Discussion in 'Curio & Relics Forum' started by Rob wilts, Sep 12, 2012.

  1. Rob wilts

    Rob wilts New Member

    Joined:
    Aug 12, 2012
    Messages:
    6
    Location:
    Hoskins, NE
    I am looking for an Inner magazine tube for a Remington Model 12 repeating rifle. But this one has to be for a .22 Rem Special not the ordinary short, long and long rifle gun. It is about 16 1/2" long and is slightly larger diameter than the ordinary sizes. I have tried Numrich Gun Parts and they only handle the standard size and are sold out of those. In fact I bought one of those and there is no way to modify it so it will work with the Rem Special shells. This gun was my Grandfather's and I would really like to return it to operating condition.

    I sure hope someone has some information on where I might find this part!
  2. Jim K

    Jim K New Member

    Joined:
    Dec 6, 2009
    Messages:
    6,397
    Brownells shows an inside tube for the Winchester 90 in WRF, which should be good for the Remington .22 special as well. It is 20" long but of course can be cut. The stock number is 895-699-000AC. You can go to their web site and check if they still have them. Cost in my catalog is $25 plus s&h, but they may have gone up. Check www.brownells.com for more info.

    If they have it, you can order it and return it if not right as long as you don't mess with it.

    Jim
  3. Rob wilts

    Rob wilts New Member

    Joined:
    Aug 12, 2012
    Messages:
    6
    Location:
    Hoskins, NE
    Jim, thanks for the information! I went to the Brownell site and ordered a tube which is even supposed to be for my Remington 12 this morning. I will let you know how it comes out but you have helped tremendously already. Thanks again.
  4. Rob wilts

    Rob wilts New Member

    Joined:
    Aug 12, 2012
    Messages:
    6
    Location:
    Hoskins, NE
    I received the inner tube today and it is too small. It will fit a regular .22, but not a .22 Remington Special. I'll have to call them and arrange for return and see if I can get a different tube that is larger.
Similar Threads
Forum Title Date
Curio & Relics Forum need a new V trigger spring Jun 28, 2014
Curio & Relics Forum Need help in ID'ing this piece. Nov 13, 2013
Curio & Relics Forum Need help with ID Nov 11, 2013
Curio & Relics Forum Info needed: Nagoya Series 5 Type 99 May 30, 2013
Curio & Relics Forum more ?'s / opinion needed on metal paint on sks May 21, 2013

Share This Page