Need some advice

Discussion in 'The Ask the Pros & What's It Worth? Forum' started by damn yankee guns, May 9, 2012.

  1. damn yankee guns

    damn yankee guns New Member

    Joined:
    Apr 12, 2012
    Messages:
    3
    Location:
    Blueridge area of SC
    Hey. I'm an older fellow who has taken up a new career in smithing. I have an old Stevens 11b that lets a shell extract from the mag as soon as the gun is fired causing the gun to jam. I've replaced all the old springs. I've tuned the slide release spring and replaced the shell stop. While the shell is in the mag up against the shell stop their sea to be a lot of slop. I've tried to adjust the stop to compensate for the slop to no availe. As soon as the gun is fired the shell slips in under the stop. I put a stiffer spring in the shell stop and the gun still fails. Any advice or suggestions.

    Thank you for any help
  2. wonderwhippet

    wonderwhippet Active Member

    Joined:
    Jan 10, 2003
    Messages:
    1,713
    Your question should be in the Technical Forum.
  3. Jim K

    Jim K New Member

    Joined:
    Dec 6, 2009
    Messages:
    6,400
    I have to confess my ignorance. You seem to be talking about a shotgun, but the Stevens 11 was a single shot .22 rolling block type rifle. Can you recheck that model number?

    Any maybe re-post on the technical fourm.

    Thanks.

    Jim
  4. popgun

    popgun New Member

    Joined:
    Sep 21, 2009
    Messages:
    409
    Do you mean Remington Model 11b
Similar Threads
Forum Title Date
The Ask the Pros & What's It Worth? Forum Need Rossi Advice Please! Apr 26, 2013
The Ask the Pros & What's It Worth? Forum Need some advice. Nov 14, 2012
The Ask the Pros & What's It Worth? Forum Need advice regarding a 45 acp semi-auto Oct 23, 2012
The Ask the Pros & What's It Worth? Forum Winchester Model 94 - Need advice Jul 7, 2012
The Ask the Pros & What's It Worth? Forum Need Advice on Old guns May 8, 2012