Problems with .45 APC cases after loading plz help!

Discussion in 'The Ammo & Reloading Forum' started by flarooster42, Feb 18, 2012.

  1. Bud0505

    Bud0505 Member

    73
    Dec 5, 2011
    Florida
    I had the same problem with 9mm shot out of my Glock. Changed to a Lee carbide crimp die and my problem was solved.

    R/Bud
     
  2. PanhandlePop

    PanhandlePop Member

    295
    May 27, 2011
    Good thoughts above. All I can add is to make sure they are actually oversized by measuring the diameter (they should be no more than 0.476 just above the extractor groove-by my manual-and the crimp diameter should be close to 0.47). If, by chance they aren't oversized you probably have an issue with the taper crimp or you are simply loading too long for the chamber of the gun you are using.
     

  3. ryan42

    ryan42 New Member

    Jan 28, 2012
    marion indiana
    Ive loaded around 1000 rounds of 45acp for my glock 21 and never had a problem and the brass i am using ive loaded 8 different times and still know buldge.I also use the lee carbide crimp dies and it works just fine.Now I have been seating a bullet into the brass and developed a bulge at the end of the bullet but i adjusted the flare a little bit larger and that took care of that.
     
    Last edited: Feb 23, 2012
Similar Threads
Forum Title Date
The Ammo & Reloading Forum Case trimming and headspace problems reloading 5.56 Sep 14, 2016
The Ammo & Reloading Forum Winchester Model 94 30-30 brass problems Aug 2, 2016
The Ammo & Reloading Forum Hornady Lock n Load AP problems Jul 16, 2016
The Ammo & Reloading Forum Bullet feeder problems Mar 16, 2016
The Ammo & Reloading Forum Primer Problems Feb 14, 2016