The Firearms Forum banner

ruger 10/22

Tags
ruger
2K views 6 replies 7 participants last post by  Iron Eagle 
#1 ·
what causes feed problems in the 10/22?I can use solid rounds without problems but wont feed hollow point rounds.They jam dead center on the tip.
 
#3 ·
You using CCI 40 grain? If not, try that. If you are and you have cleaned an oiled it properly, let your dealer deal with the hassle of shipping it to Ruger for warranty work. Make sure you have the mag listed on the inventory if you ship that. Be prepared to wait a bit as Black Friday sales will make the wait longer if you don't beat them to the repair shop.
 
#5 ·
My first guess would be the magazine. Several weeks ago I bought the newer BX-25 and it performed flawlessly with all of the .22LR that I fed through it. When I started to use it in the 10/22 that I have converted to .17Mach2, it did not feed the first round without jamming. I had to take the magazine apart to get the rounds out.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top