S&W Model 41 22 Call

Discussion in 'Technical Questions & Information' started by skip Jones, Jul 28, 2009.

  1. skip Jones

    skip Jones New Member

    Joined:
    Jun 9, 2009
    Messages:
    2
    Location:
    OBX, NC
    Having problems with misfires on my Mod 41. Tried all types of ammo with not much success. When I examined the misfired rounds, notice that it appaered that firing pin was only nicking the primer. Is firing pin damaged??
    Anyone else had similar problems?
  2. Helix_FR

    Helix_FR Active Member

    Joined:
    Apr 14, 2009
    Messages:
    3,740
    Location:
    Imperial, MO
    the channel that the pin sits in or the pin itself may have fouling on it not allowing it to go full forward. Seen this on a few 22 semi's and revolvers. You'll need to remove the pin to clean properly.
  3. skip Jones

    skip Jones New Member

    Joined:
    Jun 9, 2009
    Messages:
    2
    Location:
    OBX, NC
    Thanks for your help. Will try what you suggest.
Similar Threads
Forum Title Date
Technical Questions & Information Winchester Model 100 Recall, Who’s done it? Sep 30, 2008
Technical Questions & Information Winchester Model 70 rifle Sep 22, 2014
Technical Questions & Information Winchester model42 Sep 22, 2014
Technical Questions & Information standard arms model G , .35 cal Sep 20, 2014
Technical Questions & Information Winchester Model 50 Shotgun jammed SOLID! Sep 5, 2014

Share This Page