s&w question

Discussion in 'Centerfire Pistols & Revolvers' started by llama.45, Jan 20, 2006.

  1. llama.45

    llama.45 New Member

    Joined:
    Jan 21, 2005
    Messages:
    406
    Location:
    sewanee,tennessee
    can a s&w 1076 10mm be made to shoot the 357 sig like other 40 cal guns?
  2. inplanotx

    inplanotx New Member

    Joined:
    Jan 28, 2002
    Messages:
    8,889
    Location:
    Texas
    It may, with a magazine and barrel change. Never tried, nor do I want to try. Good luck.
  3. riverrat27

    riverrat27 New Member

    Joined:
    Dec 31, 2005
    Messages:
    4
    Location:
    kentucky
    I don't know of any conversion barrels available for that model but you may want to ask on 10mmtalk.com.
    Last edited: Jan 21, 2006
  4. stash247

    stash247 New Member

    Joined:
    Oct 18, 2003
    Messages:
    2,811
    Location:
    Central Texas
    The .357 Sig will run thru any mag designed for the .40 S&W, and more reliably, to boot!
    Obviously, the barrel will be changed, and likely a different recoil spring (20#?) will be required.
    About the challenge level of tuning a .22 conversion unit, at about the same price.
    Since you are talking 10mm, the Sig is a shorter round, which may require the use of either .40 S&W mags, or a modified follower, in the 10mm mags, with a spacer at the rear of the body; try a mag for the '40' series, full sized Smiths (4003-4006, etc) , comparing the length to your 10mm mag. Some of the 40's are shorter grip length, and these mags will not work, but the 40 series guns, with a full length grip, ought to interchange, and you would still have a functional 10 mm pistol, re-assembled !
Similar Threads
Forum Title Date
Centerfire Pistols & Revolvers A 40 CALIBER QUESTION Sep 19, 2014
Centerfire Pistols & Revolvers Couple of Beretta questions Jul 27, 2014
Centerfire Pistols & Revolvers sig 229 40 cal question Jun 5, 2014
Centerfire Pistols & Revolvers Kahr question May 18, 2014
Centerfire Pistols & Revolvers TulAmmo in .380 and 9mm question May 3, 2014

Share This Page