Tasco Bore Sighter

Discussion in 'Technical Questions & Information' started by CountryGunsmith, Feb 23, 2003.

  1. CountryGunsmith

    CountryGunsmith New Member

    Joined:
    Jan 29, 2003
    Messages:
    5,115
    Location:
    Deep Piney Woods of East Texas
    BlackGun
    Moderator
    Posts: 1856
    (11/30/01 4:31:16 pm)
    Reply | Edit | Del All Tasco Bore Sighting tool
    --------------------------------------------------------------------------------
    A BUD GAVE ME A TASCO BORE SIGHTING TOOL, WITHOUT INSTRUCTIONS. CAN SOMEONE TELL ME HOW TO USE IT?

    rules for survival: Sight alignment, Breath control, & Trigger Squeeze
    BlackGUN

    AntiqueDr
    Senior Chief Moderator Staff
    Posts: 1454
    (11/30/01 5:24:21 pm)
    Reply | Edit | Del
    ezSupporter
    Re: Tasco Bore Sighting tool
    --------------------------------------------------------------------------------
    Basically, the white dingus has a grid printed on it. The gray dingus what looks like a probe goes through the hole in the white dingus and goes into the bore. You look through the scope and theoretically align the crosshairs with the bore.

    Those caps are "aperture caps" and fit scopes up to 40mm objective bell diameter.

    The other dingus is supposed to measure the height of your line-of-sight above the bore.

    $8.99 new, give or take, but OK.


    We Buy Guns! 1 - 100, Antique or Modern!
    www.apaxenterprises.com

    tuckerd1
    Moderator
    Posts: 777
    (11/30/01 7:31:06 pm)
    Reply | Edit | Del Re: Tasco Bore Sighting tool
    --------------------------------------------------------------------------------
    Hey Andrew! What's that doohickey do?

    BlackGun
    Moderator
    Posts: 1860
    (11/30/01 7:53:59 pm)
    Reply | Edit | Del Re: Tasco Bore Sighting tool
    --------------------------------------------------------------------------------
    Doc! 3 questions . #!1 Is there a Carter's Country near 59 South towards Sugerland?
    #2. what do you do with the caps that are "aperture caps" and fit scopes up to 40mm objective bell diameter.
    #3. do you have a decent bore sighting tool? This thing won't go in the bore of .17 through the .22's


    rules for survival: Sight alignment, Breath control, & Trigger Squeeze
    BlackGUN

    Edited by: BlackGun at: 11/30/01 7:57:38 pm

    AntiqueDr
    Senior Chief Moderator Staff
    Posts: 1456
    (11/30/01 8:00:39 pm)
    Reply | Edit | Del
    ezSupporter
    Re: Tasco Bore Sighting tool
    --------------------------------------------------------------------------------
    There is one at West Bellfort/59, or at least there used to be. The aperture caps fit over the objective bell of the scope so you look through a tiny pinhole.

    We Buy Guns! 1 - 100, Antique or Modern!
    www.apaxenterprises.com
Similar Threads
Forum Title Date
Technical Questions & Information tasco scope issue Aug 13, 2012
Technical Questions & Information tasco red dot Jan 5, 2011
Technical Questions & Information Need info on Tasco TR 6-24 x 40mm scope Nov 4, 2008
Technical Questions & Information Tasco Scope Apr 19, 2008
Technical Questions & Information otasco marlin model 6060 .22lr - need parts Aug 17, 2007

Share This Page