TFF Grips Available

Discussion in 'General Discussion' started by Woodnut, May 25, 2011.

  1. Woodnut

    Woodnut Forum Sponsor Supporting Member

    Joined:
    Jul 1, 2008
    Messages:
    2,384
    Location:
    Diamondhead, MS
    Sam came up with this idea and I jumped all over it. In 2003 Sam was in Nicaragua on some other business and picked up this huge piece of Cocobolo and threw it on the plane to bring home. He ran up on it a couple months ago and sent it to me. I have cut it up into grip blanks. Let me shorten this up and get to the point.
    I am going to sell these grips with the TFF logo that I designed a month or so ago. These grips will have the logo laser cut in the grip with a fake ruby set in the center for the red dot. Again these pictures do not do them justice. These grips are for sale to the members for $60 per set. I would like to cut the price some more, but with having to pay for the laser work and the expensive Ruby’s, this is as low as I can go.
    These grips will be serial numbered and signed by me.
    Number 001 belongs to Sam
    Number 002 belongs to me.
    The other numbers are available and can be reserved if you like.

    I am going to try to bring about 10 sets to the BBQ, if I have time to make them. I have a full June. Leaving for Tennessee on Friday for 10 days to visit my daughters, and Grandson.

    Attached Files:

  2. BETH

    BETH Well-Known Member

    Joined:
    Jul 10, 2009
    Messages:
    6,887
    Location:
    naugatuck,Ct.
    very nice Carl
  3. Woodnut

    Woodnut Forum Sponsor Supporting Member

    Joined:
    Jul 1, 2008
    Messages:
    2,384
    Location:
    Diamondhead, MS
    Thanks Beth, I will be proud to wear them.
  4. JLA

    JLA Well-Known Member

    Joined:
    Feb 26, 2007
    Messages:
    18,241
    Location:
    Heart Of Texas
    Can I get a set without the Ruby inlay? Id prolly end up breaking it out anyway..
  5. Woodnut

    Woodnut Forum Sponsor Supporting Member

    Joined:
    Jul 1, 2008
    Messages:
    2,384
    Location:
    Diamondhead, MS
    Josh, You can get them anyway you want. But I don't think you would have a problem with the ruby, it is inset and flush with the surface of the grip.
    I will make some pictures of them on my gun tomorrow and post them.
  6. Marlin T

    Marlin T Active Member

    Joined:
    Jul 8, 2005
    Messages:
    7,878
    Location:
    New Mexico
    When I saw this thread I thought 'He is finally going to market these bad boys' and was thinking of this one.

    [​IMG]

    But I really like this one too.

    [​IMG]
  7. Shooter45

    Shooter45 *Administrator* Staff Member

    Joined:
    Feb 9, 2001
    Messages:
    9,571
    Marlin, I installed the top pair on my Commander the day they came in and then filed the screw heads off. I don't think they are going anywhere. :D ;)

    I intended to do a giveaway with the Walnut grips but when I opened the box, all that went out the window. I just couldn't part with them. :eek:
  8. JLA

    JLA Well-Known Member

    Joined:
    Feb 26, 2007
    Messages:
    18,241
    Location:
    Heart Of Texas
    Put me down for a set minus the Inlay. Where do I pay for them? :)
  9. Marlin T

    Marlin T Active Member

    Joined:
    Jul 8, 2005
    Messages:
    7,878
    Location:
    New Mexico
    Your busted Shooter!

    With the kind of craftsmanship that Woodnut shows, I guess I don't blame you for holding onto them. :)
  10. Woodnut

    Woodnut Forum Sponsor Supporting Member

    Joined:
    Jul 1, 2008
    Messages:
    2,384
    Location:
    Diamondhead, MS
    Josh, Thanks and you will have serial #003.
    Email to follow.
  11. JLA

    JLA Well-Known Member

    Joined:
    Feb 26, 2007
    Messages:
    18,241
    Location:
    Heart Of Texas
    Nice! Yeah I do like the way they look better without the inlay.. I never have been one for bling..;)

    Attached Files:

  12. CampingJosh

    CampingJosh Well-Known Member

    Joined:
    Sep 25, 2007
    Messages:
    5,312
    Location:
    Indiana
    Are these available for 1911s only?
  13. jack404

    jack404 Former Guest

    Joined:
    Jan 11, 2010
    Messages:
    17,607
    Location:
    Australia
    yeah the witness is looking a bit bare now eh
  14. Woodnut

    Woodnut Forum Sponsor Supporting Member

    Joined:
    Jul 1, 2008
    Messages:
    2,384
    Location:
    Diamondhead, MS
    I can have the laser logo put on any smooth grip, just ship me the grips and $30 for the laser work.
    I build some grips for other guns but mostly 1911's. Full size and Officers models. But I also do the P238 and the untra carry's. Some revolvers I can do, if there is not much work on the back of the grip. That work on the back is very time consuming, especially if you do not have the frame.
  15. gunguy25

    gunguy25 New Member

    Joined:
    Dec 25, 2009
    Messages:
    883
    Location:
    TN
    Those are cool great work!!
  16. Shooter45

    Shooter45 *Administrator* Staff Member

    Joined:
    Feb 9, 2001
    Messages:
    9,571
    I already have the grips removed on a 1911 just waiting for the new ones to arrive. :D
  17. Woodnut

    Woodnut Forum Sponsor Supporting Member

    Joined:
    Jul 1, 2008
    Messages:
    2,384
    Location:
    Diamondhead, MS
    #004 is sold, and will be delivered at the BBQ.
  18. berto64

    berto64 Active Member

    Joined:
    Jan 31, 2001
    Messages:
    7,491
    Location:
    Owyhee County, Idaho
    I'm in. Let me know how to get the ducats to you.
  19. Woodnut

    Woodnut Forum Sponsor Supporting Member

    Joined:
    Jul 1, 2008
    Messages:
    2,384
    Location:
    Diamondhead, MS
    PM sent.

    #005 is sold so far.
  20. JLA

    JLA Well-Known Member

    Joined:
    Feb 26, 2007
    Messages:
    18,241
    Location:
    Heart Of Texas
    Carl im thinkin I want to go ahead and have the inlay. The more I admire the pics the more I like it. Plus it will match my shirt..:)
Similar Threads
Forum Title Date
General Discussion New Grips Mar 4, 2014
General Discussion Grips from Woodnut Jan 7, 2014
General Discussion Pistol grips Oct 19, 2013
General Discussion Woodnut new grips all done. Jun 4, 2013
General Discussion GRIPS FOR 38 Mar 26, 2013