where do most people reload?

Discussion in 'The Ammo & Reloading Forum' started by Maddmaxx, Oct 22, 2012.

  1. woolleyworm

    woolleyworm Well-Known Member

    Feb 23, 2009
    SW Fort Worth
    My bench is set up in a little nook in the bedroom. No way I'm reloading in the garage in the summer time.
  2. time2shoot

    time2shoot Well-Known Member Supporting Member

    Jan 17, 2012
    Brandon SD
    Garage is heated and cooled, so works good,
    I just lock the doors and every now and then yell..... I'M bissey go away.
    But that is hard to do. My girls love helping me with it.
    They each pick a stage, and away we go.
    Last edited: Oct 23, 2012

  3. elkslayer4x5

    elkslayer4x5 New Member

    Aug 3, 2012
    Lane County, Oregon
    Have a bench setup in a corner of the Garage, a dual purpose bench, as I also 'reload' for my bows on that corner, part reloading/flecthing area. I built an L shaped bench, reloading presses on the right hand end and bow vise on the left end. So many intrests, and too little room. :)
  4. I have a setup in a partial basement under the main part of the house. It's really a mechanical room, but it serves as a nice place for the man cave. The temperature is fairly constant throughout the year even though there is no insulation in the one wall that is exposed to the exterior.
  5. CampingJosh

    CampingJosh Well-Known Member

    Sep 25, 2007
    Unusual situation. I live at work (in a work-owned home). The campgrounds here are 70 acres, 18 buildings, three wells, five septic systems, and a lot to keep up with.

    The "extra" building was an old block-built shower house that was put up in the 1940s (as best I can tell) and has been used for junk storage since 1991. I cleared out the junk and made a small workshop for myself.

    Whenever I change jobs, I'll certainly have to figure out something new. But for now, I'm in a great situation! :D
  6. soundguy

    soundguy Well-Known Member

    May 8, 2012
  7. Zhurh

    Zhurh Active Member

    Mar 19, 2010
    Upper Yukon, Alaska
    Now the kids are grown/away at school; empty bedrooms downstairs; where I have my bench. Interior Alaska is a dry cool climate, stays in low 60's, humidity 40% in basement; I just keep my primers in rubber sealed boat boxes with desicant blocks. Powder just on upper section of bench. Some friends in these parts store powder in outside sheds, but I figure the extreme range of temps probably doesn't do the powder good.

    I have a small tv on the bench but find myself doing my brass prep upstairs, talk to the wife & dog; too quiet for me in basement no kids around.
  8. BobMcG

    BobMcG Well-Known Member Supporting Member

    Inside in a spare bedroom set up for it.
  9. PanhandlePop

    PanhandlePop Member

    May 27, 2011
    Garage, hot or cold, doesn't matter to me. But, I do keep primers and powder stored indoors for climate control.
  10. johnsxdm

    johnsxdm New Member

    Oct 26, 2012
    45 miles SW of chicago
    In my shop area of the garage. Its heated, got AC, and CATV.
  11. YARD MAN

    YARD MAN New Member

    Oct 10, 2012
    I like your basement setup. I to, reload in my basement, clean brass, pockets, primer,and load with a Lee breech lock too. Real comffy year round. YARDMAN
  12. 1LoneWolf75

    1LoneWolf75 Active Member

    Apr 29, 2012
    Farson WY
    My house was built in '68 then added onto in late 90s. Where they join is a small area that I took over and turned into my office space. Then when I got my press I added a bench. No fan to circulate air and is nice and heated in winter and cool enough fer me in summer(away from a/c).
  13. al45lc

    al45lc Active Member

    Mar 8, 2010
    colorful colorado
    Basement. My own room, walled and closed off from the rest of the house. She gets total dominion over the house except for that room.
    I have a computer (reloading and ballistics programs), a TV, a radio and a fridge.
    I currently have two benches for reloading, and a cleaning bench.
    BTW, the mess here isn't mine, my Brother and Father load here too, they're the messy ones! :)

    Attached Files:

  14. time2shoot

    time2shoot Well-Known Member Supporting Member

    Jan 17, 2012
    Brandon SD
    now thats a powder selection.:eek::D
  15. soundguy

    soundguy Well-Known Member

    May 8, 2012
Similar Threads
Forum Title Date
The Ammo & Reloading Forum RELOADING - Where do I start? Jul 12, 2016
The Ammo & Reloading Forum Mosin-Nagant reloaders..Where are you? Oct 30, 2014
The Ammo & Reloading Forum Where to get reloading supplies Sep 27, 2012
The Ammo & Reloading Forum Reloading: Where to start/manuals? Mar 18, 2010
The Ammo & Reloading Forum Where can I get reloading supplies? Dec 29, 2009