Your opinions?

Discussion in 'The Ask the Pros & What's It Worth? Forum' started by Double D, Dec 22, 2009.

  1. Double D

    Double D Administrator Staff Member Supporting Member

    Joined:
    Jul 16, 2009
    Messages:
    10,695
    Location:
    North Florida
    This colt police positive 38 serial # is 10039

    Attached Files:

  2. Double D

    Double D Administrator Staff Member Supporting Member

    Joined:
    Jul 16, 2009
    Messages:
    10,695
    Location:
    North Florida
    This is a H&R model 922 .22cal. Serial # N8575

    Attached Files:

  3. red14

    red14 Active Member

    Joined:
    Aug 17, 2009
    Messages:
    3,947
    Location:
    N FLA
    I like it!
  4. Double D

    Double D Administrator Staff Member Supporting Member

    Joined:
    Jul 16, 2009
    Messages:
    10,695
    Location:
    North Florida
    This is a titan .25cal ser#298828 made in usa with american and italian parts. Looks like it has hardly been fired if at all.

    Attached Files:

  5. fleetwood1976

    fleetwood1976 Active Member

    Joined:
    Feb 22, 2009
    Messages:
    1,416
    Location:
    Southern Indiana
    1.) Police positive is awesome. I have a 90% one in the 30,xxx range that i believe was 1913, so yours is very early. The one pictured looks as if it is starting to patina where handling, but this is still a good survivor. I would rate at $300 to 350. I gave $385 for mine and everyone has told me it was too much. I noticed a police department marking or something on the bottom of the grip frame, with research that could put it in a whole different league. I was thinking my serial number was under the crane and not the bottom of the grip frame.

    2.) Great plinker, $150 for that purpose.

    3.) I would say $100. But I see them in most shops for $119 now.
    Last edited: Dec 22, 2009
  6. Double D

    Double D Administrator Staff Member Supporting Member

    Joined:
    Jul 16, 2009
    Messages:
    10,695
    Location:
    North Florida
    Thanks. I traded a ruger mark 3 and a box of 308 ammo for all three.
  7. fleetwood1976

    fleetwood1976 Active Member

    Joined:
    Feb 22, 2009
    Messages:
    1,416
    Location:
    Southern Indiana
    You did fine, I would have traded, I want to get one of those little 25's but they are usually over $100. And good condition is very rare with them.
  8. red14

    red14 Active Member

    Joined:
    Aug 17, 2009
    Messages:
    3,947
    Location:
    N FLA
    DD, can you put a quarter by the Titan? I can't tell the size.

    How is the trigger pull on the H&R? I shot my Smith 63 yesterday and I did lot's better.
  9. Double D

    Double D Administrator Staff Member Supporting Member

    Joined:
    Jul 16, 2009
    Messages:
    10,695
    Location:
    North Florida
    Its about 4" long and 3 1/4 high. Glad you did better yesterday. You just needed to be closer.
    Trigger pull is average on the h&r
    Last edited: Dec 22, 2009
  10. Double D

    Double D Administrator Staff Member Supporting Member

    Joined:
    Jul 16, 2009
    Messages:
    10,695
    Location:
    North Florida
    The mark 3 I traded was a fixed sight 4.5" slab side barrel. I might consider selling the titan.
  11. Jim K

    Jim K New Member

    Joined:
    Dec 6, 2009
    Messages:
    6,397
    I would suggest replacing the ejector rod head on the Colt; that would bump the value a lot more than the part will cost.

    Also, you might check www.gungrips.com for replacement grips.

    Jim
Similar Threads
Forum Title Date
The Ask the Pros & What's It Worth? Forum U.S. Springfield 1863 Civil War Musket price and opinions needed Jul 17, 2014
The Ask the Pros & What's It Worth? Forum Opinions on M1 Carbine - Inland Sep 27, 2012
The Ask the Pros & What's It Worth? Forum WW2 German PPK Opinions Jun 10, 2012
The Ask the Pros & What's It Worth? Forum opinions upon browning and parker Feb 21, 2011
The Ask the Pros & What's It Worth? Forum WWII PPK - opinions please Aug 23, 2010

Share This Page