The Firearms Forum banner

Your most accurate rifle?

13K views 91 replies 57 participants last post by  NicoPuelma 
#1 ·
please note your most accurate rifle, I'm curious in the responses.

Mine is a
Make: howa
Model m1500 bull
Caliber: 308
 
#9 ·
I am accurate, my rifles are precise.

I am more consistently accurate with my Howa 1500 30-06. But my best group came from my Eddystone US Model of 1917 30-06.



But of course that is way lucky, but it does shoot around 1MOA consistently with the proper load.

 
#13 ·
AR15, 18" white oak armament match barrel & bolt, trued receiver face, fail zero M16 bcg, Vortex viper pst 4.5x16x50 ffp scope, Harris bipod, troy alpha rail, a2 fixed stock.

It'll stay MOA all day long, half that if I haven't had a pot of coffee.
 
#17 ·
Stevens 200- 300 win mag
Stevens 200- 308 win
Savage axis- 22-250
Springfield 840- 222 Rem.
1917 Winchester- 308 Norma
Ruger M77 tang safety- 338 win mag
These shoot .3" groups or less.
Savage 110- 7mm rem mag 3/4" groups, still doing load development.
1927 yugo Mauser- 8x57 1/2 groups
1922 Brno Mauser- 8x57 1" groups
Savage 110 custom-416 Taylor 1" groups, still doing load development.
 
#19 ·
There is two rifles.
Shiloh Sharps #1 sporter in 40-70 Sharps Straight. MVA tang sight and spirit level, windage adjustable front sight. MOA or less out to 600 yards when I can do my part. Usually 200 yards and in is one big, ragged hole.

A Savage Tactical I no longer own in 300 Win. Mag., 12X fixed power, adjustable objective, Leupold target scope. Sub-MOA out to 600, easily. From 300 yards in it was one, ragged hole.

Handguns. Hands down my Freedom Arms Mod. 97 in 45 Colt.
 
#24 ·
#28 ·
Wards western field 22lr.
Winchester model 70 .300 win. Mag.

The 22 will take the primers out of shotgun shells at 50 yards. When I got it it had a cut down hacksaw blade for a trigger spring, trigger pull went from around 2 pounds when I got it to -2 (fire on closing of the bolt) about 200 rounds later. I replaced it with a piece of spring steel to keep it useable until I get around to tracking down the part.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top