The Firearms Forum banner

H & R Top Break .38 5 shot black plastic handle needed

826 views 3 replies 4 participants last post by  Twaits 
#1 ·
Hello all, I accidentally dropped and BROKE my soon to be son-in-law's Harrington & Richardson Arms Company 5 shot .38 revolver that he got from his Grandfather that passed away....... Does anyone know where I can find a replacement black handle for this? I've ordered two so far and they were either for the .32 model or a different model that had the pins in the wrong place that seat into the gun frame.
Any ideas would be deeply appreciated. Here are some pics if that helps.
 

Attachments

See less See more
3
#4 ·
These are the replacements you need. You will need to do a little fitting but they will work. These are for the large frame 5 shot .38 and 6 shot .32 models with the hammer:

https://vintagegungrips.com/shop/hr-32-38-break-top-revolver-whammer/

I don't know which screws and escutcheons are the right ones for this but they have those too. Their website is not very clear on which ones you need. They should make it much clearer. But I've used Vintage gun grips in the past and they are pretty decent once they are fitted. I usually sand them down a bit to look a little more worn and original.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top