The Firearms Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 23 Results
  1. Black Powder Shooting / Muzzleloaders / Handguns
    Hello to everybody, I would like to have your opinion on my Pietta Remington New Model Army replica: it was made in 1975 (Italian year code AA) and has a rather low serial number (02812). The main difference with more recent replicas is, I guess, the plum colored frame and I would be interested...
  2. The Ask the Pros & What's It Worth? Forum
    I recently acquired a Remington Model 4 in .22 cal. that was part of a deceased relative's collection. The serial number on the receiver is 318076 and the bottom of the barrel is stamped with the matching serial number, a "PR" for the barrel code, and magnaflux and test stamps. What has me...
  3. .22-Rimfire Forum
    Hello. Can anyone help me restore two Model Remington 514 short and long. Serial is C U. They both need parts, complete rebuilds. Thanks
  4. Technical Questions & Information
    I'm working on a Remington Nylon 66 that won't cock by hand when the cover is on, except sometimes when the safety is on. That's right, intermittent. On rare occasion, it will cock normally with the cover on, but that is so rare, not more than once in 20 tries, I debated leaving it out of the...
  5. The Ask the Pros & What's It Worth? Forum
    I inherited some old rifles and this is a weird one. I looked it up and sifting through picture after picture online I haven't found one that exactly matches this gun. The barrel is long and has no sight, there are screw holes over the model number and the bold action has been seated into the...
  6. Technical Questions & Information
    Hi everyone, I recently purchased a Black Aces Pro Series X Pump Action Shotgun (12 gauge) and I absolutely love it. However, I was in the woods and the forward pin "walked out" and I could not find it. I have reached out to black aces for parts, but it is kind of a pain as their website does...
  7. The Ask the Pros & What's It Worth? Forum
    I have this Remington model 12 22 pump action rifle, despite hours of scouring the internet I cant find anything about the shapes on the left side of the barrel. If what I'm reading is correct, I believe it was manufactured in May of 1920. Someone please correct me if I'm mistaken. I've attached...
  8. The Ask the Pros & What's It Worth? Forum
    The stock is rough and butt stock damaged but still tring to find out infoi as to exactly what it is, what caliber, approx value (hoping I got a good deal) Thetag reads something like Remington Illion, NY USA, Pat May Nov 1th 1864,, April 17th 1868, Aug 27th 1867 Nov 7th 1871 See photos
  9. The Ask the Pros & What's It Worth? Forum
    Once again, I'm pretty useless on any background or dating on this gun. Scope is Leupold "Vari-X 3x9 Compact". Dad's notes on this one include: "Bolt Action 5 Shot Magazine" "34in Barrel"
  10. The Ask the Pros & What's It Worth? Forum
    Another of dad's hunting rifle clones, although this one definitely has more visible signs of wear than the others. Again, I have not found magazines for this or any other of his rifles. The scope is a Bushnell Sportview 3T09, and the only other info I can offer comes from dad's inventory...
  11. The Ask the Pros & What's It Worth? Forum
    I used to refer to this monstrosity as "The space gun". No offense meant by that - from what little research I've done, it seems this is a favorite among target shooters & I know my father loved it and used it often. Since my last round of posts, I was lucky enough to find an almost-complete...
  12. Large-Bore/Small-Bore Rifle/Shotgun
    Does anyone here have any experience with the Remington pump action rifles and also the semi auto series of rifles. I'd like to know the durability of them, specifically the 76 sportsman. I'm looking at one in 30-06 that seems in good condition and is overall a nice deal. I'm concerned with...
  13. Technical Questions & Information
    I thought I had two Remington model 24 rifles, handed down to me by my father, who has since passed away. I recall him speaking of two rifles and stating that they would increase in value if a third and final rifle in the “set” were purchased. Since his passing I have looked at the rifles and...
  14. Technical Questions & Information
    I thought I had two Remington model 24 rifles, handed down to me by my father, who has since passed away. I recall him speaking of two rifles and stating that they would increase in value if a third and final rifle in the “set” were purchased. Since his passing I have looked at the rifles and...
  15. Technical Questions & Information
    I have a new Remington wooden stock with bolt that is stamped 870 on thee end grain where it fits into the receiver, but wondering how I determine which gauge it is for. It looks a bit small to be a 12 gauge stock. A Remington recoil pad is also mounted on the stock as shown in the photo. I...
  16. The Ask the Pros & What's It Worth? Forum
    I am trying to find out more information on this Remington 1889 Shotgun. My dad came across this gun, and I know it is in pretty bad shape, but I am going to be cleaning it up. I know that the 205384 is the serial number on the firearm, and what I could tell by this is that it was manufactured...
  17. The Ask the Pros & What's It Worth? Forum
    Hello everyone. This is my first time posting because I am completely stumped. I had a chance to pick up a Remington 8 Gauge Kiln Gun today and have no idea what the value is, if any at all. There was not a lot of time to consider it before hand so I had to jump on it. I have been looking online...
  18. Large-Bore/Small-Bore Rifle/Shotgun
    Trying to figure out what is better for duck hunting. Looking to findo out a few diffrent things for a comparison and contrast. Cold weather does one do better in cold than the other? Any one have any jamming problems or feeding problems? Any ejection problems? How is cleaning it? Any...
  19. The Ask the Pros & What's It Worth? Forum
    Greetings Everyone, I'm purchasing a small collection from the widow of a good friend who recently passed away. I've excluded the firearms I've been able to identify myself and included 1 that I'm fairly confident of the manufacturer but unsure of the model. Getting more pictures or information...
  20. Curio & Relics Forum
    I have a NMA with a cut-off barrel. It is serial numbered 140457 with all the Union acceptance proof marks. There's an additional serial number of "500" stamped on the bottom of the handle strap. The pistol looks to be used as a "fencing tool" during its' lifetime :) Surprisingly, the screws...
1-20 of 23 Results
Top