The Firearms Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
109 Posts
No wedge pin in the 1858 Remington. :) If you drop the loading lever the pin will pull forward out of the cylinder and the cylinder will drop out. The spare can then be put in by reversing this procedure. If you practice you can do this in less than 12 sec.:D

The Spiller and Burr is the next easiest to do this with. The 1860 takes a little longer but can be changed quickly with practice. I have all three.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top