The Firearms Forum banner

.223 Desired trim length

778 Views 3 Replies 4 Participants Last post by  JLA
For loading .223 is 1.750 a good trim length?
1 - 4 of 4 Posts
Yap! that's the low that you will go to.
spot on, and it will function good in semi's if you keep them trimmed at that length
that should be what your manual recommends.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top