AK-47 barell

Discussion in 'Technical Questions & Information' started by jimmy, Oct 20, 2004.

  1. jimmy

    jimmy New Member

    Jan 17, 2004
    Does anyone Know how the barell is removed from a stamped chinese reciever? :confused:
  2. CountryGunsmith

    CountryGunsmith New Member

    Jan 29, 2003
    Deep Piney Woods of East Texas
    Depends on if you want to remove just the barrel or the barrel and the barrel trunnion. The trunnion is pinned and riveted to the receiver, then the barrel is pressed in and pinned.

    To remove just the barrel, you would need to drift out the barrel pin (usually VERY tight) then press out the barrel. This will require a hydraulic press and some ingenuity since the force will be applied at a slight angle.

    If you are replacing a barrel, remember that Chinese barrels are narrower (19mm) than European barrels (23mm).

Similar Threads
Forum Title Date
Technical Questions & Information AK-47 Build need help Dec 28, 2013
Technical Questions & Information AK-47 bolt question Dec 6, 2012
Technical Questions & Information What is the best lube for AK-47's Dec 5, 2012
Technical Questions & Information Bulgarian AK-47 Mags Nov 22, 2012
Technical Questions & Information AK-47 Bolt & Bolt Carrier Question Nov 15, 2012