Attaching Forend Tip

Discussion in 'Technical Questions & Information' started by CountryGunsmith, Feb 24, 2003.

  1. CountryGunsmith

    CountryGunsmith New Member

    Joined:
    Jan 29, 2003
    Messages:
    5,114
    Location:
    Deep Piney Woods of East Texas
    mckheean
    V.I.P. Member
    Posts: 78
    (12/11/02 2:35:54 pm)
    Reply | Edit | Del All Black plastic foretip
    --------------------------------------------------------------------------------
    I am getting ready to put a plastic foretip on a stock that I am working on could someone tell me the best way to fasten it to the wood after I cut the stock to the correct length?Thanks Benny

    kdub01
    *TFF Senior Staff*
    Posts: 1567
    (12/11/02 4:49:47 pm)
    Reply | Edit | Del Re: Black plastic foretip
    --------------------------------------------------------------------------------
    Drill matching holes in tip and stock to match a wooden dowel rod. Use epoxy to set dowel and tip on stock.
    "Keep Off The Ridgeline"

    Xracer
    *TFF Senior Staff*
    Posts: 3181
    (12/11/02 6:13:05 pm)
    Reply | Edit | Del Re: Black plastic foretip
    --------------------------------------------------------------------------------
    Benny.....if you're Jewish, you're not supposed to have one.

    Edited by: Xracer at: 12/11/02 6:14:33 pm

    mckheean
    V.I.P. Member
    Posts: 79
    (12/12/02 8:04:14 am)
    Reply | Edit | Del Foretip
    --------------------------------------------------------------------------------
    Thanks for the info that's what I had in mind to do just wanted to be sure.This sure is a great site for any info and I enjoy all the people that have helped me here.I am not jewish just a good old Southern Boy from NC. Benny