The Firearms Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
617 Posts
Discussion Starter · #1 ·
cleaning a revolver with a blued finish.

should a bronze brush or nylon brush be used in the bore and cylinders?

can isopropyl alcohol be used to remove oil from the blued finish
before applying paste wax for protection?
 

· Registered
Joined
·
3,727 Posts
Either brush can be used, neither will hurt the bore or cylinders. Alcohol could be used to remove any oils, simple green would work better.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top