The Firearms Forum banner
1 - 1 of 1 Posts

· Banned
Joined
·
750 Posts
Bullets seated too far out of the case will jam in the forcing cone of a semi auto. This will not allow the slide to go into battery. The shooter will pull the bullet forcing the slide back. After using a rod to remove the bullet a shooter will try 2 or 3 before giving up. This is not that uncommon. The shooter just fails to pick up the brass. Shooters new to hand loading.;)
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top