Help with Ranger model 35
Hello everyone,, I need a bit of help with a Ranger model 35.
It belongs to a friend, and something is missing as well as broken.
The striker, which goes inside the bolt, fell out after cleaning, and will not stay in, just slides in and out.
There is what looks like a pin hole in the rear of the bolt, but the striker only has indents, not a pin hole that goes all the way through.
The striker needs to be replaced as the front is chipped from dry firing I expect, but no parts to be found. It still fired as it is, or was before the striker fell out.
I have read it was actually a Stevens, or another brand, but nothing shows up as matching it.
Here is the striker if anyone has one that can check and see what holds the striker in place.
![]()
It belongs to a friend, and something is missing as well as broken.
The striker, which goes inside the bolt, fell out after cleaning, and will not stay in, just slides in and out.
There is what looks like a pin hole in the rear of the bolt, but the striker only has indents, not a pin hole that goes all the way through.
The striker needs to be replaced as the front is chipped from dry firing I expect, but no parts to be found. It still fired as it is, or was before the striker fell out.
I have read it was actually a Stevens, or another brand, but nothing shows up as matching it.
Here is the striker if anyone has one that can check and see what holds the striker in place.
