Joined
·
1,327 Posts
Adjusting pawls on the LNL is a 1/8 turn increment process to accomplish correct indexing. To answer your question; Handle down/ram up is the right pawl. Handle up/ram down is the left pawl.
Keep in mind the adjusting screws are not so much raising and lowering the pawls, they are simply changing the angle of contact with the advancing wheel cogs.
Shoot me a PM if you are really stuck...
Keep in mind the adjusting screws are not so much raising and lowering the pawls, they are simply changing the angle of contact with the advancing wheel cogs.
Shoot me a PM if you are really stuck...
