The Firearms Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
2,006 Posts
I have about 15 bushings. Some of them can be inserted and removed using just my hand others (most of them) require channel locks to put them and take them out. I think it's a manufacturing tolerance issue. Some bushings are just a little larger than others and require more force to seat and unseat.
 

· Registered
Joined
·
2,006 Posts
I've never had a problem with the die coming loose in the bushing. It is the bushing coming loose from the press. It happens most frequently with the powder measure. Again it's the bushing coming loose from the press not the powder measure coming loose from the bushing.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top