The Firearms Forum banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
467 Posts
Discussion Starter #1
I have a lorcin 9mm. that needs to be taken apart and cleaned.

how do I get this thing apart??

any tips or hints would be appreciated!

I will post with other issues as they come up (there are 2) but I need to get it apart and clean and inspect first before I worry about the rest of it.


thanks
slugger
 
  • Like
Reactions: tedwitt

·
Philogynist & Sycophant, Looking For Work
Joined
·
6,801 Posts
I have a lorcin 9mm. that needs to be taken apart and cleaned.

how do I get this thing apart??

any tips or hints would be appreciated!

I will post with other issues as they come up (there are 2) but I need to get it apart and clean and inspect first before I worry about the rest of it.


thanks
slugger
Lorcins can be a challenge to disassemble, but I find that a bandsaw works well, and may be the only way to make the gun safe.
 

·
GUNZILLA
Joined
·
5,990 Posts
Check this video out!

 
  • Like
Reactions: tedwitt

·
Registered
Joined
·
16,923 Posts
As fragile is the ones I've seen seem to be, a sledgehammer should work pretty good.
 
  • Like
Reactions: jim brady

·
Super Moderator
Joined
·
38,539 Posts
Gredat information but this is a 13 year old thread.

The new software sux, with the recommended read below that brings up ancient crap.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top