The Firearms Forum banner

1 - 1 of 1 Posts
G

·
Guest
Joined
·
0 Posts
Discussion Starter #1
BlackGun
*TFF Staff*
Posts: 2924
(2/7/02 4:37:08 pm)
Reply | Edit | Del All I need someone to look up a C.O.L. Please
--------------------------------------------------------------------------------
I don't have the Cart. overall lengeth of a .17 Remington in any of my reloading manuels for a .17 trimmed down to 1.786 case length using a 25 Gr Hornedy HP budditt.
Tread On Me, But, Leave My DONUT Alone! !


BlackGUN

shooter22
*TFF Staff*
Posts: 887
(2/7/02 5:06:00 pm)
Reply | Edit | Del Re: I need someone to look up a C.O.L. Please
--------------------------------------------------------------------------------
Blalck Gun -

The overall lengeth of a .17 Remington for a .17 trimmed down to 1.786 case length using a 25 Gr Hornedy HP

"2.170 direct from the Hornaday book"

Input from shooter22's computerr by ruffitt

Upon further thought, You might not be able to get that COL. If the bullet will not set deep enough due to trim length being what it is.

Just checked agein and the figures above are correct . It is 2.170" for a case trimmed to 1.785


Edited by: shooter22 at: 2/7/02 9:16:32 pm

Xracer
*TFF Senior Staff*
Posts: 1600
(2/7/02 5:10:51 pm)
Reply | Edit | Del Re: I need someone to look up a C.O.L. Please
--------------------------------------------------------------------------------
BG......"Cartridges Of The World" lists the .17 Remington as having a case length of 1.79" and an Overall Length of 1.86".

BlackGun
*TFF Staff*
Posts: 2955
(2/9/02 12:43:07 pm)
Reply | Edit | Del Re: I need someone to look up a C.O.L. Please
--------------------------------------------------------------------------------
Intersting! I took a caliper and measured a C.O.L of a factory .17 Remington w/ 25 Gr HP and it measuered at 2.150

Thanks guys
Tread On Me, But, Leave My DONUT Alone! !


BlackGUN

Edited by: BlackGun at: 2/9/02 1:01:14 pm
 
1 - 1 of 1 Posts
Top