The Firearms Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Technical problem. Grandson tried to put a .17 into the chamber. The bolt did not close and there was no discharge. However, now when I put a full tube down the slot and chamber a .22 LR; the first round will fire but will not eject. After digging the brass out the next round will chamber but the round will not fire.. Two local gunsmiths, in Boise area, both looked at it. Told me to come back in a couple of days. Both loaded one round in the chamber, fired it, then handed me the gun and said it was fixed. $100. Still no firing of 2nd round. Any suggestions?//
 
1 - 3 of 3 Posts
Top