G
Guest
·Guest
Joined
·
0 Posts
loader44
V.I.P. Member
Posts: 109
(1/5/02 6:00:17 pm)
Reply | Edit | Del All loading supplies
--------------------------------------------------------------------------------
looking for a new source for my loading supplies.
will buy in bulk for all:
bullets ( 9mm,38,45acp,44mag ) 5k of each.
Primers ( 5k of each, large and small ).
Powder ( 4lb,5lb, and 8lb kegs ).
Thanks for any help.
loader44.
kdub01
Senior Chief Moderator Staff
Posts: 136
(1/5/02 6:06:42 pm)
Reply | Edit | Del Re: loading supplies
--------------------------------------------------------------------------------
Natchez Shooters Supplies (www.natchezss.com)
Widener's Reloading and Shooting Supply, Inc (www.wideners.com)
Dave3
Member
Posts: 13
(1/16/02 9:42:39 pm)
Reply | Edit | Del Re: loading supplies
--------------------------------------------------------------------------------
Midwayusa.com
Edited by: BlackGun at: 2/12/02 5:26:15 pm
tuckerd1
Moderator
Posts: 1062
(1/17/02 7:32:21 am)
Reply | Edit | Del Re: loading supplies
--------------------------------------------------------------------------------
Powder and primers - I buy at gunshows. Most cost effective way with all the haz mat charges to ship.
Bullets - MidSouth Shooter's Supply
Brass - StarLine Brass
"They that can give up essential Liberty to obtain a little temporary safety deserve neither Liberty nor safety." (...Benjamin Franklin, 1759)
MPinkston
Member
Posts: 41
(2/12/02 3:10:55 pm)
Reply | Edit | Del Re: loading supplies
--------------------------------------------------------------------------------
Has anyone tries Once fired brass at a place called www.OnceFiredBrass.com ?
Prices like:
9mm $0.01 ea.
40sw $0.0125 ea.
45ACP $0.0425 ea.
223rem $0.025 ea.
30-06 $ 0.085 ea.
Of course at these prices is it NOR deprimed or cleaned yet.
Edited by: BlackGun at: 2/12/02 5:23:55 pm
BlackGun
*TFF Staff*
Posts: 3047
(2/12/02 5:18:07 pm)
Reply | Edit | Del Re: loading supplies
--------------------------------------------------------------------------------
They are located 30 miles from here.(Splendora, Tx) Those are some good prices, cheaper than GB! www.OnceFiredBrass.com
Cara Specialties 17096 Main St. Splendora, TX 77372
office phone 281-399-9838 FAX 775-845-9469
25 acp 3¢ ea.
32 acp 3¢ ea.
380 acp 2.5¢ ea. nickle 3 ¢ ea.
9mm brass 1 ¢ ea. nickle 1.5 ¢ ea.
38spl 1.9 ¢ ea. nickle 2.1 ¢ ea.
357 Sig 4 ¢ ea. nickle 4.5 ¢ ea.
357 mag 7 ¢ ea. nickle 7.5 ¢ ea.
40S&W 1.25 ¢ ea. nickle 1.5 ¢ ea.
44spl 8 ¢ ea. limited 44mag 8 ¢ ea. Limited
45acp 4.25 ¢ ea. nickle {very limited} 5 ¢ ea.
we get small amounts of many calibers call for price.
223 MILITARY 1.9 ¢ ea. 223 commercial 2.5 ¢ ea.
243 win 8.5 ¢ ea.
270 win 8.5 ¢ ea.
30-30 5 ¢ ea.
30-06 8.5 ¢ ea.
7mm rem mag 12 ¢ ea
lot of other calibers, due to supply call for price.
walnut or corncob media .99 ¢ ea.
chucks speed loaders 38/357 OR 41/44/45lc 1 for 3$ or 2 for 5$
If you need help or just want to ask a question call, we are familiar with cartridge conversions OR, can at least direct you to another dealer or company who can help. thank you
caren & charlie
Tread On Me, But, Leave My DONUT Alone! !
BlackGUN
Edited by: BlackGun at: 2/12/02 5:28:05 pm
BlackGun
*TFF Staff*
Posts: 3048
(2/12/02 5:22:54 pm)
Reply | Edit | Del Re: loading supplies
--------------------------------------------------------------------------------
contact George Miller for your bullets $11.26 for 500 9MM
[email protected] He will give you a full price list when you e-mal him. He's also a Texas boy and a Dallas County Sheriff's Deputy.
Tread On Me, But, Leave My DONUT Alone! !
BlackGUN
Edited by: BlackGun at: 2/13/02 6:49:29 pm
Moskovskyya
V.I.P. Member
Posts: 111
(2/13/02 9:03:17 am)
Reply | Edit | Del Re: loading supplies
--------------------------------------------------------------------------------
Take a look at Jeff Bartlett www.gibrass.com
V.I.P. Member
Posts: 109
(1/5/02 6:00:17 pm)
Reply | Edit | Del All loading supplies
--------------------------------------------------------------------------------
looking for a new source for my loading supplies.
will buy in bulk for all:
bullets ( 9mm,38,45acp,44mag ) 5k of each.
Primers ( 5k of each, large and small ).
Powder ( 4lb,5lb, and 8lb kegs ).
Thanks for any help.
loader44.
kdub01
Senior Chief Moderator Staff
Posts: 136
(1/5/02 6:06:42 pm)
Reply | Edit | Del Re: loading supplies
--------------------------------------------------------------------------------
Natchez Shooters Supplies (www.natchezss.com)
Widener's Reloading and Shooting Supply, Inc (www.wideners.com)
Dave3
Member
Posts: 13
(1/16/02 9:42:39 pm)
Reply | Edit | Del Re: loading supplies
--------------------------------------------------------------------------------
Midwayusa.com
Edited by: BlackGun at: 2/12/02 5:26:15 pm
tuckerd1
Moderator
Posts: 1062
(1/17/02 7:32:21 am)
Reply | Edit | Del Re: loading supplies
--------------------------------------------------------------------------------
Powder and primers - I buy at gunshows. Most cost effective way with all the haz mat charges to ship.
Bullets - MidSouth Shooter's Supply
Brass - StarLine Brass
"They that can give up essential Liberty to obtain a little temporary safety deserve neither Liberty nor safety." (...Benjamin Franklin, 1759)
MPinkston
Member
Posts: 41
(2/12/02 3:10:55 pm)
Reply | Edit | Del Re: loading supplies
--------------------------------------------------------------------------------
Has anyone tries Once fired brass at a place called www.OnceFiredBrass.com ?
Prices like:
9mm $0.01 ea.
40sw $0.0125 ea.
45ACP $0.0425 ea.
223rem $0.025 ea.
30-06 $ 0.085 ea.
Of course at these prices is it NOR deprimed or cleaned yet.
Edited by: BlackGun at: 2/12/02 5:23:55 pm
BlackGun
*TFF Staff*
Posts: 3047
(2/12/02 5:18:07 pm)
Reply | Edit | Del Re: loading supplies
--------------------------------------------------------------------------------
They are located 30 miles from here.(Splendora, Tx) Those are some good prices, cheaper than GB! www.OnceFiredBrass.com
Cara Specialties 17096 Main St. Splendora, TX 77372
office phone 281-399-9838 FAX 775-845-9469
25 acp 3¢ ea.
32 acp 3¢ ea.
380 acp 2.5¢ ea. nickle 3 ¢ ea.
9mm brass 1 ¢ ea. nickle 1.5 ¢ ea.
38spl 1.9 ¢ ea. nickle 2.1 ¢ ea.
357 Sig 4 ¢ ea. nickle 4.5 ¢ ea.
357 mag 7 ¢ ea. nickle 7.5 ¢ ea.
40S&W 1.25 ¢ ea. nickle 1.5 ¢ ea.
44spl 8 ¢ ea. limited 44mag 8 ¢ ea. Limited
45acp 4.25 ¢ ea. nickle {very limited} 5 ¢ ea.
we get small amounts of many calibers call for price.
223 MILITARY 1.9 ¢ ea. 223 commercial 2.5 ¢ ea.
243 win 8.5 ¢ ea.
270 win 8.5 ¢ ea.
30-30 5 ¢ ea.
30-06 8.5 ¢ ea.
7mm rem mag 12 ¢ ea
lot of other calibers, due to supply call for price.
walnut or corncob media .99 ¢ ea.
chucks speed loaders 38/357 OR 41/44/45lc 1 for 3$ or 2 for 5$
If you need help or just want to ask a question call, we are familiar with cartridge conversions OR, can at least direct you to another dealer or company who can help. thank you
caren & charlie
Tread On Me, But, Leave My DONUT Alone! !
BlackGUN
Edited by: BlackGun at: 2/12/02 5:28:05 pm
BlackGun
*TFF Staff*
Posts: 3048
(2/12/02 5:22:54 pm)
Reply | Edit | Del Re: loading supplies
--------------------------------------------------------------------------------
contact George Miller for your bullets $11.26 for 500 9MM
[email protected] He will give you a full price list when you e-mal him. He's also a Texas boy and a Dallas County Sheriff's Deputy.
Tread On Me, But, Leave My DONUT Alone! !
BlackGUN
Edited by: BlackGun at: 2/13/02 6:49:29 pm
Moskovskyya
V.I.P. Member
Posts: 111
(2/13/02 9:03:17 am)
Reply | Edit | Del Re: loading supplies
--------------------------------------------------------------------------------
Take a look at Jeff Bartlett www.gibrass.com
