The Firearms Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
1,159 Posts
Make sure the bolt is totally clean, use brake cleaner and compressed air or clean as above. If all the old grease/cosmoline is out and you are still having issues disassemble and check for any bends or burrs on firing pin that may be a problem when they heat up after firing. First the bolt needs to be spotless.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top