The Firearms Forum banner
1 - 1 of 1 Posts

Discussion Starter · #1 ·
*TFF Staff*
Posts: 1562
(10/16/02 1:30:46 pm)
Reply | Edit | Del All Need data from a Swift reloading manual
I need the data from the Swift bullet reloading manual for the 165 grain bullet(schirroco) in 300 win mag using hodgdon, IMR, or other powders.

I need the data by friday afternoon. I am going to the Tulsa gunshow and am getting powder there.

V.I.P. Member
Posts: 61
(10/16/02 3:44:55 pm)
Reply | Edit | Del Re: Need data from a Swift reloading manual
Here's a link on the 180gr with H4350 I think.

Hope this helps.

OOppps, just saw you wanted the 165gr. Sorry, but this should give you a starting point anyway. The Swift internet page is not open yet. Maybe a phone call to them would help.

I am not a native Texan, but I got here as fast as I could!

Edited by: inplanotx at: 10/16/02 4:50:45 pm
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.