The Firearms Forum banner
1 - 13 of 13 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 ·
I'm trying to help a friends wife restore his old shotgun that his father gave him, I know the gun is not worth much its a sentimental value.....
New England single shot shotgun 12 gauge.
hard to find trigger guard,nurmich has all the parts but sold out of the trigger guard. checked on eBay and lost bid at last second, on eBay they had additional parts that looked similar but for a different gauge I was thinking that all trigger guard's and trigger group are the same for that model but unsure. please help....
 

·
Registered
Joined
·
1,599 Posts
If you want help, you are going to need to post photos of the shotgun so we can determine the model. There are two companies that start with New England.
 

·
Premium Member
Joined
·
10,996 Posts
How much of the gun do you have? That fuzzy picture where you can only read half the writing ain't much to go on.

Oh my manners. Welcome to the forum and we'll do our best to help.
 

·
Registered
Joined
·
11 Posts
Discussion Starter · #6 ·
Everything but trigger guard and trigger pins, springs that group is gone. I have barrel, stock fore arm all or the screws for those. just receiver, pins,springs etc. missing. I ordered some used parts off eBay I hope they fit.. thanks so much for all the help.
 

·
Registered
Joined
·
1,599 Posts
Is there a Model name anywhere on the frame? New England Fire Arms (NERF) made several single shot shotguns. It may be a Pardner, Survival Shotgun, Tamer or Tracker. They all used a similar frame and some of the parts appear to be interchangeable. Hopefully you understand that posting blurry picture of a stripped frame and expecting us to know everything about the parts you need isn't practical.

Try Numrich Gun Parts. Here is a link for the Pardner. They don't have a trigger guard in stock for this model.

http://www.gunpartscorp.com/Manufac...3412/Pardner-SingleShot-37581.htm?results=All

Here is a link for the Tamer. They have a trigger guard, but we are not even sure if this is even the right model.

http://www.gunpartscorp.com/Manufac...arms-33412/TamerShotgun-37589.htm?results=All
 

·
Registered
Joined
·
11 Posts
Is there a Model name anywhere on the frame? New England Fire Arms (NERF) made several single shot shotguns. It may be a Pardner, Survival Shotgun, Tamer or Tracker. They all used a similar frame and some of the parts appear to be interchangeable. Hopefully you understand that posting blurry picture of a stripped frame and expecting us to know everything about the parts you need isn't practical.

Try Numrich Gun Parts. Here is a link for the Pardner. They don't have a trigger guard in stock for this model.

http://www.gunpartscorp.com/Manufac...3412/Pardner-SingleShot-37581.htm?results=All

Here is a link for the Tamer. They have a trigger guard, but we are not even sure if this is even the right model.

http://www.gunpartscorp.com/Manufac...arms-33412/TamerShotgun-37589.htm?results=All
New England.. looks blurry in person.. lol
Thanks for the help, ill have to get another photo.
 

·
Premium Member
Joined
·
2,225 Posts
Numrich:
Pardner firing pin, 279230A
Tamer firing pin, 279230C

Two different pins.
 
1 - 13 of 13 Posts
Top