The Firearms Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Looking for a solution to a problem with Sccy cpx 2. I can put a cartridge in the breach and when I release the slide it pushes in. But even without discharging the weapon, the cartridge will not eject without slapping the slide. Anyone?
 

·
Super Moderator
Joined
·
41,399 Posts
A couple of things quickly come to mind. Try a different ammo. Lubrication. Extractor broken ir dirty..
 

·
TFF Chaplain
Joined
·
20,446 Posts
No advice, but a hearty welcome to TFF from the UK

You should get plenty of good advice in time.

upload_2020-6-9_23-16-16.jpeg
 

·
Premium Member
Joined
·
19,870 Posts
Those handguns have a lifetime warranty. Even if you bought it used.
 

·
Premium Member
Joined
·
13,254 Posts
Hi David, welcome from Sitka, Alaska. You'd mentioned putting a cartridge into the breech. Are you placing a single cartridge into the breech through the ejection port and then easing the slide forward? If that's the case, the extractor claw might not be jumping the case rim and engaging the groove ahead of it. Net result is that when you pull the slide back without the extractor having hooked the cartridge the round will remain in the chamber.
 
1 - 7 of 7 Posts
Top