The Firearms Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
162 Posts
Are you just firing a primer in an empty case with no powder charge and no bullet? If so I try the same thing once when I was testing a 1911 that I had change the firing pin on and when I pulled the case out the primer was half out and the front of the case crimped in where it tried to in the barrel. Soo as Highboy said its normal.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top