The Firearms Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
1,327 Posts
You are using a extruded base tubular shaped powder which is going to be a headache if you want to load any quantity, the "cutting" you are experiencing was enough for me to go with ball powders when loading 308 Check your data - most if not all IMR powder is tubular, look for Hodgdon - H414 or H380 is ball, also Winchester 760 is claimed to be very favorable in the 270 according to good 'ol Lyman, hope this helps....
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top