The Firearms Forum banner
1 - 1 of 1 Posts

2,093 Posts
Discussion Starter · #1 ·
Does the drive hub (in the center of the sub-plate) that turns the shell plate have and up and down movement on your machine? I'm not positive but I thought mine was fixed and flush with the sub-plate surface.

I cleaned the sub-plate with a degreaser and the drive hub dropped down about 1/16" - 1/8" below the sub-plate surface. It moves freely up and down after cleaning and I don't believe it did that before. When the shell holder plate is bolted down the hub rises up.

The reason I ask is that after cleaning the machine seems to index better than before - not perfect, but better. I'm wondering if the drive hub could be causing the index problem. Hornady is closed today so I can't call them.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.