Remington 1100 ejection problem.

Discussion in 'Technical Questions & Information' started by gvw3, Oct 21, 2012.

  1. Oct 21, 2012 #1
    gvw3

    gvw3 Well-Known Member

    Joined:
    Oct 16, 2011
    Messages:
    13,615
    Location:
    Chicago IL Area
    My son has a Remington 1100 that is having a problem ejecting the shells. It was working fine until he took it apart to clean it. What should we look for? :eek:
     
    gvw3, Oct 21, 2012
    gvw3, Oct 21, 2012
  3. Oct 21, 2012 #2
    JLA

    JLA Well-Known Member

    Joined:
    Feb 26, 2007
    Messages:
    18,240
    Location:
    Heart Of Texas
    Most of the time when i get an 1100 or an 11-87 that wont eject its usually a friction issue. i.e. not enough lube on the moving parts.. The other possibility is he didnt get the gas piston and seat in correctly.
     
    JLA, Oct 21, 2012
    JLA, Oct 21, 2012

  5. Oct 21, 2012 #3
    CloserangeReaper

    CloserangeReaper New Member

    Joined:
    Oct 20, 2012
    Messages:
    28
    Location:
    Beaufort, NC
    Make sure he has the O-rings in correctly and make sure they aren't damaged as well.
     
    CloserangeReaper, Oct 21, 2012
    CloserangeReaper, Oct 21, 2012
  6. Oct 21, 2012 #4
    Helix_FR

    Helix_FR Active Member

    Joined:
    Apr 14, 2009
    Messages:
    3,732
    Location:
    Imperial, MO
    I agree above. he has the gas seals in wrong.
     
    Helix_FR, Oct 21, 2012
    Helix_FR, Oct 21, 2012
  7. Oct 21, 2012 #5
    gvw3

    gvw3 Well-Known Member

    Joined:
    Oct 16, 2011
    Messages:
    13,615
    Location:
    Chicago IL Area
    We just took it apart. The o-ring is bad. Would that do this?
     
    gvw3, Oct 21, 2012
    gvw3, Oct 21, 2012
  8. Oct 21, 2012 #6
    CloserangeReaper

    CloserangeReaper New Member

    Joined:
    Oct 20, 2012
    Messages:
    28
    Location:
    Beaufort, NC
    Yes. The o-rings are the main cause of jamming in the 1100s
     
    CloserangeReaper, Oct 21, 2012
    CloserangeReaper, Oct 21, 2012
  9. Oct 21, 2012 #7
    gvw3

    gvw3 Well-Known Member

    Joined:
    Oct 16, 2011
    Messages:
    13,615
    Location:
    Chicago IL Area
    Thanks guys. We will pick up some fresh o-rings and give it a try....
     
    gvw3, Oct 21, 2012
    gvw3, Oct 21, 2012
Similar Threads
Forum Title Date
Technical Questions & Information Remington 1100 inserting locking bar Feb 23, 2013
Technical Questions & Information Remington 1100 stock Oct 30, 2012
Technical Questions & Information Remington 1100 bolt not closing after dis/reassembly Oct 3, 2012
Technical Questions & Information Remington1100 LW 410 Locking block Aug 4, 2012
Technical Questions & Information Remington 1100 lW 40 blows out the primer Jul 22, 2012