Spots annoying spots

Discussion in 'Centerfire Pistols & Revolvers' started by Zigzag2, Feb 25, 2003.

  1. Zigzag2

    Zigzag2 Guest

    kmshaffer
    Member
    Posts: 1
    (2/16/03 10:43:30 pm)
    Reply | Edit | Del All Spots annoying spots
    --------------------------------------------------------------------------------
    My blued pistol tends to have some spots or streaks appear on the outside metal on the slide and frame, after pulling it out of the plastic case with foam interior. Is this due to moisture, or the lub on it? Also there seems to be a bit of lub being displaced from under the grip quite often, is there a good way to dry it?

    LIKTOSHOOT
    *TFF Senior Staff*
    Posts: 6996
    (2/16/03 11:28:50 pm)
    Reply | Edit | Del Re: Spots annoying spots
    --------------------------------------------------------------------------------
    Normally factory lube-a good cleaning will take care of it. Break it down-clean and re-lube.


    LTS



    kmshaffer
    Member
    Posts: 4
    (2/17/03 11:46:20 am)
    Reply | Edit | Del thanks
    --------------------------------------------------------------------------------
    thanks, that's what i usually do, break ti down clean it out good, lube it and then place the lock in it and put it back in the case, where after takign ti back out fo the case the spots and leakage is back.


    fredarmory
    Member
    Posts: 24
    (2/17/03 10:08:10 pm)
    Reply | Edit | Del Re: Spots annoying spots
    --------------------------------------------------------------------------------
    Use a pin to lube it only where it needs it, a sewwing needle works too.
    Also the can of gun scrubber works extremely well.

    kmshaffer
    Member
    Posts: 7
    (2/20/03 10:39:36 pm)
    Reply | Edit | Del thanks
    --------------------------------------------------------------------------------
    thanks, things are workign out better