The Firearms Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
5,114 Posts
Discussion Starter #1
woodsmith42
V.I.P. Member
Posts: 26
(2/5/02 8:56:23 pm)
Reply | Edit | Del All Walther .22
--------------------------------------------------------------------------------
Walther "Meisterbruche" bolt action, single shot .22. About 85% condition both wood and metal. Nicely figured walnut. Has v-grooves on both action and barrel (scout type mount) I don't have the rear sight that fits in grooves. If all three screws holding the action/barrel are tightened correctly and with right ammo it will make one ragged hole about .40 at 50 yards from a sandbag on the bench at local range.

LIKTOSHOOT
*TFF Senior Staff*
Posts: 3653
(2/5/02 9:06:18 pm)
Reply | Edit | Del Re: Walther .22
--------------------------------------------------------------------------------
...and your question would be?

1. Is it accurate enough?

2. Where can I find a rear sight?

3. Which place is best to mount the scope?

4. Do need three screws, some are missing.

5. Whats it worth?

6.15% rough....is this bad??

7. Anyone have a scope for it??

woodsmith42
V.I.P. Member
Posts: 28
(2/5/02 9:13:36 pm)
Reply | Edit | Del Well..........
--------------------------------------------------------------------------------
Het LTS, I thought this section was "What's it worth"?. So....................that IS the question. Thanks, Woody

Zigzag2
*TFF Senior Staff*
Posts: 2203
(2/6/02 7:40:29 am)
Reply | Edit | Del Re: Well..........
--------------------------------------------------------------------------------
hehehe...good point Woodsmith

LIKTOSHOOT
*TFF Senior Staff*
Posts: 3657
(2/6/02 8:05:44 am)
Reply | Edit | Del Re: Well..........
--------------------------------------------------------------------------------
So, you pick #5? See how easy we are.

Walther Model "V" Meisterbuchse (Champion)
85% and missing rear micrometer sight $325.00
 
1 - 1 of 1 Posts
Top